A timed reasoning test is partly a test of reasoning and partly a test of what you do when a question will not give way. The JobCannon SHL-style practice test has three sections, each on its own clock, so the arithmetic is simple and the habits are what matter. This guide turns the three clocks into seconds per question, sets checkpoints, explains what to do about a stubborn question and when to guess, and shows how to review after the test.
Start with the arithmetic
The three clocks give three different budgets:
- Verbal reasoning: 12 questions in 8 minutes, which is 480 seconds, or 40 seconds a question.
- Numerical reasoning: 10 questions in 12 minutes, which is 720 seconds, or 72 seconds a question.
- Inductive reasoning: 10 questions in 10 minutes, which is 600 seconds, or 60 seconds a question.
Across all 32 questions that averages a little over 56 seconds each. But the clocks do not mix. If you finish verbal reasoning with two minutes spare, those two minutes are gone. And if you are slow in numerical reasoning, you cannot borrow from inductive. So the budget that matters is the one for the section you are in.
Every question has the same weight, which makes one slow question expensive. Two minutes on a single verbal question is 120 seconds, the budget for three of them.
Checkpoints
A checkpoint is a time by which you should have reached a given question. It tells you early whether you are drifting. Using the budgets above:
- Verbal: question 4 at 2 minutes, question 7 at 4 minutes, question 10 at 6 minutes.
- Numerical: question 4 at 3 minutes 36 seconds, question 6 at 6 minutes, question 9 at 9 minutes 36 seconds.
- Inductive: question 6 at 5 minutes, and the last one begins at 9 minutes.
You do not need to check them on every question. Glance at the clock after every third or fifth question. If you are more than one question behind, speed up the next few by using a rougher estimate or a quicker elimination, rather than trying to recover everything at once.
When to stop working on one question
Set a cap of one and a half times the budget: 60 seconds in verbal reasoning, 108 seconds in numerical reasoning and 90 seconds in inductive reasoning. A question that goes to the cap has already cost you 20, 36 or 30 seconds more than planned, and the cost grows from there.
In JobCannon's test, an answer is locked once you give it and there is no way back to an earlier question. That removes the "skip it and return at the end" plan. When you reach your cap, pick the best answer you have and move on. A rough estimate, or an option left after you eliminated the ones that cannot be right, is better than a second minute spent on certainty.
Real assessments differ by employer, role and version, so whether you can move back is something to check in the instructions in your own invitation. Practise in the way they describe. If you can move between questions, skipping the hardest ones and returning to them is a perfectly good plan. It is simply not available here.
Guessing
In the JobCannon test a wrong answer costs nothing beyond what a blank costs, and a question that is unanswered when its clock ends counts as wrong. So the rule is simple: never leave a question unanswered.
A blind guess on a verbal question is right one time in three, because there are three options. On a numerical or inductive question it is right one time in four. If you can rule out one of four options, your odds rise to one in three. Guessing blindly on every question would average about 9 correct answers out of 32, which is why a guess is worth making but is not a plan. A guess is for the last seconds of a section or for the question that has hit its cap.
When a clock is nearly out and you still have questions left, stop reading and choose an option for each. Any pick has a chance of being right. A blank has none. In a real assessment, check the invitation for any penalty for wrong answers before you adopt the same policy.
Small habits that save seconds
- Read the question before the data. Knowing what you need tells you which numbers, which sentence or which part of the sequence to look at.
- Estimate before you calculate. A rough answer takes seconds and rules out options that are wrong by a factor of ten or by a unit.
- Do not re-read the whole passage. Go back to the one sentence that bears on the statement.
- Write the rule or the base in one line. For a sequence, the rule. For a percentage, what it is a percentage of. Then calculate.
- Breathe once after a hard one. A question that went badly has no bearing on the next one, and the next one has the same weight.
Review after the test, not during
Since you cannot revise inside the JobCannon test, the review happens afterwards, and that is where most of the learning is. For each question you got wrong, note what happened: did you run short of time, apply the wrong method, misread the question or simply not know? The fix for each is different. A time problem needs a cap and a faster first step. A method problem needs one of the guides. A misreading needs slower reading of the stem.
Keep those notes in a single error log. The two-week plan shows how to use it, and how to read your result shows how to turn the three section scores into a starting point.
A short pacing drill for each section
- Verbal: take the six passages in true, false or cannot say: six practice passages and finish them in 4 minutes, which is 40 seconds each.
- Numerical: do a short set from the numerical reasoning test. Take five questions and allow 6 minutes, which is 72 seconds each.
- Inductive: work the eight sequences in inductive reasoning practice in 8 minutes, which is 60 seconds each.
Treat the clock as a tool you learn to use, not a threat. When you have done each drill once, take the JobCannon SHL-style practice test to see all three clocks together. The SHL-style practice page and the verbal reasoning test give more material for the verbal drill. JobCannon is not affiliated with or endorsed by SHL Group Limited. SHL is a trademark of SHL Group Limited, and the result of this test is a practice score and not an official score.